Samsung DVD-V6000 User Manual
Hide thumbs
Also See for DVD-V6000:
- User manual (68 pages) ,
- User manual (68 pages) ,
- User manual (68 pages)
Related Manuals for Samsung DVD-V6000
Summary of Contents for Samsung DVD-V6000
- Page 1 User’s Manual DVD-V5500 DVD-V6000 DVD-V6500 www.samsungvcr.com STANDBY/ON OPEN/CLOSE...
-
Page 2: Safety Instructions
Safety Instructions The following illustrations represent precautions. The lightning bolt is a warning sign alerting you to dangerous voltage inside the product. DO NOT OPEN THE DVD-VCR. Refer to service personnel. 40¡C 5¡C DO NOT expose the DVD-VCR to extreme temperature conditions (below 5°C and above 40°C) or to extreme humidity conditions (less than 10% and more than 75%). -
Page 3: Disc Type And Characteristics
Disc Type and Characteristics This DVD-VCR is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Audio Video AUDIO-CD Audio *(DVD-V6500) VIDEO-CD Audio Video - DO NOT play CD-ROM, CD-I and DVD-ROM in this player! (CDGs play audio only, not graphics.) - It may not play CD-R,CD-RW and DVD-R, -RW, DVD+R, +RW in all cases due to the type of disc or condition of the recording. -
Page 4: Table Of Contents
Contents Getting Started Getting Started Safety Instructions ....2 Disc Type and Characteristics ..3 Overviews . - Page 5 Playing Back Playing Back Playing a Cassette ....37 Adjusting Picture Alignment Manually . . . 37 Selecting the Audio Output Mode ..38 Playing a Cassette in Slow Motion .
-
Page 6: Overviews
Overviews Front View of the DVD-VCR (DVD-V5500/DVD-V6000) 8 9 10 11 Front View of the DVD-VCR (DVD-V6500) 8 9 10 11 DVD DECK OPEN/CLOSE BUTTON VIDEO CASSETE COMPARTMENT EJECT BUTTON STANDBY/ON BUTTON REWIND/SKIP BACK BUTTON STOP BUTTON PLAY/STILL BUTTON 6 - English FAST FORWARD / SKIP NEXT BUTTON 10. -
Page 7: Rear View Of The Dvd-Vcr (Dvd-V5500)
Rear View of the DVD-VCR (DVD-V5500/DVD-V6000) AUDIO L/R OUT JACKS AERIAL IN CONNECTOR AUDIO L/R OUT JACKS (DVD ONLY) VIDEO OUT JACK OUT TO TV CONNECTOR Rear View of the DVD-VCR (DVD-V6500) AUDIO L, R OUT JACKS AERIAL IN CONNECTOR AV2 (DEC./EXT.) SCART (EURO-21) JACK AUDIO L, R OUT JACKS (DVD ONLY) VIDEO OUT JACK... -
Page 8: Accessories
Accessories You have just purchased a SAMSUNG DVD-VCR. Together with your DVD-VCR, you will find the following accessories in the box. STANDBY/ON OPEN/CLOSE Batteries for Remote Remote Control Control RF Cable Audio & Video Cable 8 - English Inserting Batteries in... -
Page 9: Tour Of The Remote Control
Tour of the Remote Control STANDBY/ON OPEN/CLOSE 1. STANDBY/ON Used to turn the power on or off. 2. Number Buttons 3. CLEAR Used to clear a preset TV station. Used to cancel a preset recording. Used to cancel a preset mark. Used to set the tape counter to zero. -
Page 10: Connections
Connections •Quick Overview ..... 10 •Connecting DVD-VCR to the TV using the RF Cable ......11 •Connecting DVD-VCR to the TV using the SCART Cable . -
Page 11: Connecting Dvd-Vcr To The Tv Using The Rf Cable
Connecting DVD-VCR to the TV using the RF Cable To receive television programmes a signal must be received from one of the following sources: • An outdoor aerial • An indoor aerial • A cable television network • A satellite receiver Make sure that both the television and the DVD-VCR are switched off before Note... -
Page 12: Connecting Dvd-Vcr To A Satellite Receiver Or Other Equipment
Connecting DVD-VCR to a Satellite Receiver or Other Equipment You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the appropriate outputs are available on the equipment chosen. The following illustrations give a few examples of the connection possibilities. -
Page 13: Connecting Dvd-Vcr To The Tv Using The Audio/Video Cable
Connecting DVD-VCR to the TV using the Audio/Video Cable You can connect your DVD-VCR to the television using the audio/video cable if the appropriate input is available on the television. Connect one end of the video cable into the VIDEO output jack on the rear of the DVD-VCR. Plug the other end of the video cable into the appropriate input connector on the television. -
Page 14: Connecting Dvd-Vcr To The Tv Using The Component Video Cable (Dvd Only)
Connecting DVD-VCR to the TV using the Component Video Cable (DVD Only) Your TV must support progressive scan input to allow you to watch component video output. You will enjoy high quality accurate colour reproduction images. Component video seperates the picture element into black and white(Y), blue(Pb), red(Pr) signals to present most clear and clean images. -
Page 15: Av Receiver Connections
AV Receiver Connections To take full advantage of the movie theater experience that DVD offers, you may want to connect your DVD- VCR to a complete Surround Sound system, including an A/V Receiver and six Surround Sound speakers. If your A/V receiver is equipped with a Dolby Digital Decoder, you have the option to bypass the DVD-VCR’s built-in Dolby Digital Decoder. -
Page 16: Plug & Auto Setup
Plug & Auto Setup Your DVD-VCR will automatically set itself up when it is plugged into the mains for the first time. TV stations will be stored in memory. The process takes a few minutes. Your DVD-VCR will then be ready for use. -
Page 17: Settings
Settings • Tuning Your Television for the DVD-VCR . . 17 • Setting the Date and Time ....18 • Setting the Menu Language ... . . 19 •... -
Page 18: Setting The Date And Time
Setting the Date and Time Your DVD-VCR contains a 24-hour clock and calendar used to: • Automatically stop programme recording • Preset your DVD-VCR to record a programme automatically You must set the date and time when: • You purchase the DVD-VCR. •... -
Page 19: Setting The Menu Language
Setting the Menu Language Press the MENU button, then press the OK or √ button. Language : English SETUP Clock Install User Set Auto Power Off : Off PROG Screen Messages : On FUNC RETURN Press the OK or √ button again. The Language Set menu is displayed. -
Page 20: Presetting The Stations Manually
Press the … or † button to select Auto Setup, Press the OK button. A message is displayed, indicating that any channels already preset on your DVD-VCR will be deleted. Auto Setup Your data will be lost Press OK to continue MENU to exit RETURN Press the OK button to start the auto scanning. -
Page 21: Clearing A Preset Station
Press the … or † button to select the required programme number. Press the √ button to preset the station. The MANUAL TUNING menu will be displayed. Press the œ or √ button to start scanning the channels. The frequency band is scanned and the first station found is displayed. -
Page 22: Clearing A Preset Station
Clearing a Preset Station If you have stored a TV station: • That you do not require • At the wrong programme position, you can cancel it. Press the MENU button, then press the OK or √ button. Press the … or † button to select Install, then press the OK or √... -
Page 23: Changing The Preset Station Table
Press the … or † button to select required preset TV station. The selected station is displayed at the same time on the television screen. Press the OK button to change the programme number assigned to a station. TV STATION TABLE NAME - - - - …... -
Page 24: Vcr Functions
Functions • Selecting the Colour Mode ... . . 24 • NICAM ......25 •... -
Page 25: Nicam
NICAM NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 38. Press the MENU button, then press the OK or √... -
Page 26: Videoplus Extend (Dvd-V6000/Dvd-V6500)
VideoPlus Extend (DVD-V6000/DVD-V6500) To prevent delays or over-runs the VCR has a function called VideoPlus Extend allowing you to extend the recording time by up to 60 minutes. • Only use if PDC is not available or set to Off. •... -
Page 27: Screen Messages
Screen Messages Your DVD-VCR displays most information both the DVD-VCR and the television. You can choose to display or hide this information on the television screen (If you configure the Screen Message to Off, the Fast Forward and Rewind messages will not be displayed on the screen. -
Page 28: Repeat Play
Repeat Play You can set repeat play to repeat the tape continuously from beginning to end. Press the MENU button, then press the … or † button to select VCR. SETUP Tape Select : E180 Repeat Play : Off PROG FUNC RETURN Press the OK or √... -
Page 29: Recording A Programme Immediately
Recording a Programme Immediately Before recording a programme, you must have preset the corresponding station (unless you are recording via an external video source). If you have not done so, refer to pages 18~19. Switch on the television. Insert the video tape in to the VCR deck, with the window visible and the safety tab intact or the opening covered with adhesive tape. -
Page 30: Recording From Another Vcr Or Camcorder
Recording from Another VCR or Camcorder You can copy a cassette to your DVD-VCR from another video source, such as another VCR or a Camcorder etc. • It is an infringement of copyright laws to copy prerecorded cassettes or to re-record them in any form without the permission of the owners of the corresponding copyright. -
Page 31: Using The Videoplus Feature
Using the VideoPlus Feature (DVD-V6000/DVD-V6500) Before presetting your DVD-VCR: • Switch on both the television and your DVD-VCR • Check that the date and time are correct • Insert the cassette on which the programme is to be recorded (safety tab intact) Up to six programmes can be preset. -
Page 32: Modifying Videoplus Programming
If the programme and times are correct, press the OK button. Press the STANDBY/ON button to activate the timer. • The numbers next to each TV programme listing are VideoPlus code numbers, which allow you to programme your DVD-VCR instantly with the remote control. -
Page 33: * Dvd-V6000/Dvd-V6500
Using the Timer Programming Feature The Timer Programming feature allows you to preset the DVD-VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset. • Before presetting a recording, check that the date and time are correct. - Page 34 Press the √ button to select Start (recording start time). PR Day Start Stop Speed 01 SA 01 13 : 25 RETURN • Press the œ or √ button to select the hour or minute. • Press the … or † button to set the stop time. Press the √...
-
Page 35: Checking A Preset Recording
Checking a Preset Recording You can check your preset recordings: • When you have finished presetting the DVD-VCR • If you have forgotten which programmes will be recorded * DVD-V5500 Press the MENU button, then press the … or † button to select PROG, then press the OK or √... -
Page 36: Cancelling A Preset Recording
Cancelling a Preset Recording You can cancel any programmes that are: • Incorrect • No longer required * DVD-V5500 Press the MENU button, then press the … or † button to select PROG , then press the OK or √ button. -
Page 37: Playing A Cassette
Playing Back • Playing a Cassette ....37 • Adjusting Picture Alignment Manually ..37 • Selecting the Audio Output Mode ..38 •... -
Page 38: Selecting The Audio Output Mode
Selecting the Audio Output Mode You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs. The following options are available. Press the AUDIO button on the remote control until the required option is displayed. Option Description Used to listen to the sound on the left Hi-Fi channel. -
Page 39: Searching For A Specific Sequence
Searching for a Specific Sequence Each time you record a cassette on this DVD-VCR, an “index” is automatically marked on the tape when recording starts. The Search function allows you to fast-forward or rewind to a specific index and start playback from that point. Depending on the direction selected, the indexes are numbered as follows: Prev... -
Page 40: Using The Tape Counter
Intro Scan Press the SEARCH button. The VCR Function menu is displayed. Press the … or † button to select Intro Scan. VCR Function Go To [0:00:00] SETUP End Search Intro Scan PROG FUNC RETURN Press the OK or √ button. Press the œœ... -
Page 41: Using The Tape Counter
Using the Tape Counter The tape counter: • Indicates the elapsed time in the play and record modes (hours, minutes and seconds) • Is reset when a cassette is inserted in the DVD-VCR • Allows you to find the beginning of a sequence easily •... -
Page 42: Dvd Functions
Functions • Setting Up the Language Features ..42 • Setting Up the Audio Options ... 44 • Setting Up the Display Options ..45 •... -
Page 43: Using The Subtitle Language
Using the Audio Language Press the MENU button in the stop mode. Press the … or † button to select DVD, then press the OK or √ button. DVD Setup SETUP Language Setup Audio Setup Display Setup Parental Setup : PROG FUNC RETURN... -
Page 44: Setting Up The Audio Options
Setting Up the Audio Options Press the MENU button in the stop mode. Press the … or † button to select DVD, then press the OK or √ button. DVD Setup SETUP Language Setup Audio Setup Display Setup Parental Setup : PROG FUNC RETURN... -
Page 45: Setting Up The Display Options
Setting Up the Display Options Press the MENU button in the stop mode. Press the … or † button to select DVD, then press the OK or √ button. DVD Setup SETUP Language Setup Audio Setup Display Setup Parental Setup : PROG FUNC RETURN... -
Page 46: Setting Up The Parental Control
Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. Press the MENU button in the stop mode. -
Page 47: Changing The Password
Setting up the Rating Level Press the … or † button to select Rating Level, then press the OK or √ button. Parental Setup Use Password : Yes Rating Level Change Password RETURN MENU Rating Level Level 8 Adult Level 7 Level 6 Level 5 Level 4... -
Page 48: Divx(R) Registration (Dvd-V6500)
MENU Playback can only support English Subtitle. If you have any question or any problem, please feel free to contact your nearest SAMSUNG Service Center and agency. DivX Feature Table • A DivX disc may not be playable as playback √... - Page 49 Write the downloaded file onto a blank CD-R disc, using the following settings. Download the software update file from the Samsung Internet Site. (http://www.samsung.com/ Support/ProductSupport/Download/index.aspx) After checking your DVD-VCR Model name on the rear, download a file using the Search Your Model/Name window.
-
Page 50: Special Playback Features
Special Playback Features During DVD/CD playback you can select from the following special playback options. To resume normal playback, press the Still Press the √ll button during playback. • The picture will still and the audio will mute. • To resume playback, press the √ll button. •... -
Page 51: Using The Display Function
Using the Display Function To view the current Title, Chapter/Track, and counter position, press the INFO. button during DVD playback. The Display screen can also be used to quickly choose a title, chapter/track, or playing time. View the Display During DVD/CD playback, press the INFO. button. •... -
Page 52: Adjusting The Aspect Ratio (Ez View)
Adjusting the Aspect Ratio (EZ View) This function may behave differently depending on the type of disc. To play back using aspect ratio (DVD) Press the EZ VIEW button. • The screen size changes when the button is pressed repeatedly. •... -
Page 53: Selecting The Subtitle Language
Selecting the Subtitle Language Some DVDs provide subtitles in one or more languages. You can use the SUBTITLE button to quickly view and change settings. During playback, press the SUBTITLE button. Press the œ or √ button to select the desired subtitle language The default is Off. -
Page 54: Changing The Camera Angle
Changing the Camera Angle Some DVD Movies provide you with various camera angle views on the same scene while they are showing. To activate the feature press the ANGLE button. You’ll see the angle icon while watching a DVD with multi angles available. When the angle icon comes up to the screen press the ANGLE button to see the angle menu. -
Page 55: Marks
Marks Up to three Bookmarks can be inserted for a given DVD/ VCD (DVD-V6500), allowing you to quickly jump to your favorite scene or song. During playback, press the MARK button. Press the œ or √ button to select one of the three mark placeholders (- - -). -
Page 56: A To B Repeat
A to B Repeat A to B Repeat feature enables you to repeat the designated section on a DVD or VCD(DVD-V6500)/CD. To activate, mark where to start (A) and where to end (B) of the section you want to watch. Press the REPEAT button while in playback mode, then press the œ... -
Page 57: Mp3/Wma Play
MP3/WMA Play If you insert an MP3/WMA Disc into the DVD player, you can see the folder directory. MP3/WMA Play Function Press the … or † button to select the desired music folder, then press the OK button. Total : 3/4 ROOT ROOT JPEG... -
Page 58: Program & Random Play (Cd/Mp3/Wma)
Program & Random Play (CD/MP3/WMA) You can listen to songs randomly or in the desired sequence. Program Play Press the MODE button in the stop mode. Press the œ or √ button to select PROGRAM. Press the OK button. PROGRAM RANDOM RETURN Press the …/†,œ/√... -
Page 59: Picture Cd Playback
Picture CD Playback If you insert a Picture (JPEG) CD Disc into the DVD- VCR, you can see the folder directory. Press the … or † button to select the picture you want to view, then press the OK button. The selected picture is displayed. -
Page 60: Slide Show
Slide show Press the œ or √ button to select Press the OK button. The 3 icons are displayed for time interval. Photo : 1/215 Timer : Press the œ or √ button to select one of these. Press the OK button. The pictures change automatically with about an 6 second interval. -
Page 61: Divx/Mpeg4 Playback (Dvd-V6500)
DivX/MPEG4 Playback (DVD-V6500) When the disc is inserted, the file structure of the disc will be shown. Depending on the file format, a different icon will appear next to each file. The files will have been highlighted. Use … or † button to select the movie file, and then press OK or √ll. - Page 62 Zoom During play, press the MENU button on the remote control. Then press the … or † button to select the FUNC , then press the OK or √ button. The Function menu is displayed. Press the … or † button to select DVD Function. Press the OK or √...
-
Page 63: Reference
Reference • Technical Specifications ....64 • Troubleshooting Guide (VCR) ... 65 • Troubleshooting Guide (DVD) ... 66 Technical Specifications Troubleshooting Guide (VCR) Troubleshooting Guide (DVD) -
Page 64: Technical Specifications
Technical Specifications Rated voltage Power consumption Weight General Size Operating ambient temperature Installation conditions Video input (Rear) Input Audio input (Rear) Input (Front) RF out Audio (DVD, VCR) Output Audio (DVD only) Video (DVD, VCR) Video (DVD only) Tape format Colour system Tuning system Video S/N... -
Page 65: Troubleshooting Guide (Vcr)
Troubleshooting Guide (VCR) Before contacting the Samsung after-sales service, perform the following simple checks. If you are unable to solve the problem after reading the above instructions, note: The model and serial number on the rear of your DVD-VCR •... -
Page 66: Troubleshooting Guide (Dvd)
Troubleshooting Guide (DVD) Problem Ensure that the disc is installed with the label side facing up. Check the region number of the DVD. Disc does not play. This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD, or a CD. 5.1 channel sound is reproduced only when the following conditions are met. - Page 67 UNITED KINGDOM This Samsung product is warranted for the period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased.
- Page 68 THIS APPLIANCE IS DISTRIBUTED BY ELECTRONICS www.samsungvcr.com AK68-00646C-00...