Modifying ShowView Programming
If you wish to correct the programme displayed or modify certain elements, such as the recording speed,
you can do so before you press RETURN a second time to confirm.
If you wish to...
Select an input source other
than the tuner (AV1, AV2)
Record a programme every day
(Monday to Sunday) at the same time
Record a programme every week
on the same day and at the same time
Extend the recording time
Select the recording speed
Select the PDC recording
Then...
Press the ➛ or ❿ buttons, until the
Press the INPUT SEL. button one or more times to change the
input source selection.
Result:
The programme number is replaced by:
•
The AV1, AV2 source using the INPUT SEL. button
for a satellite tuner or external video source
The input source must be selected before changing any other
value.
Press the ➛ or ❿ buttons, until the
Press the
or
buttons, until the
❷
displayed.
Press the ➛ or ❿ buttons, until the
Press the
or
buttons, until the
❷
displayed, followed by the required day.
Example:
W-SA
(Weekly Saturday)
Press the ➛ or ❿ buttons, until the
Press the
or
buttons to increase or decrease the stop
❷
time.
Press the ➛ or ❿ buttons, until the recording speed selection
mode.
Press the
or
buttons until the correct indication is
❷
displayed:
• Auto
(Auto Tape Speed Select) : see page 32
• SP
(Standard Play)
• LP
(Long Play)
Press the ➛ or ❿ buttons, until the PDC off mode.
Press the
or
buttons until the "On" indication is displayed.
❷
Do not select PDC unless you are sure the programme you
wish to record is broadcast with PDC. If you do set PDC On
(by selecting "On" in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won't take place.
VCR
PR
selection mode.
selection mode.
Day
(Daily) value is
DLY
Day
selection mode.
W-
(Week) value is
Stop
selection mode.
GB
31