Download Print this page
Samsung ML-1200 Series Quick Manual

Samsung ML-1200 Series Quick Manual

Hide thumbs Also See for ML-1200 Series:

Advertisement

1
2
3
Gently shake the cartridge from side to
side to distribute the toner evenly inside
the cartridge.
5
CAUTIONS:
• To prevent damage, do not expose the toner cartridge to light for more than a few minutes.
Cover it with a piece of paper.
• If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water.
Hot water sets toner into fabric.
Visit us at
http://www.samsungprinter.com
Home
SAMSUNG LASER PRINTER
ML-1200 SERIES
Remove the toner cartridge from its bag and
remove the paper covering the cartridge.
4
6
If any items are missing or damaged, notify your dealer
immediately. Components may differ from one country to another.
1
2
4
5
Keep the media
below this height
mark.
(ML-1210 Only)
Make sure both the printer and the computer are turned off.
To the parallel
port on PC
Attach the supplied
paper output support
as shown.
3
Load a stack of paper with the print side
facing up.
Notes:
• Do not push the width guide far enough to
cause the media to move up.
• If you do not adjust the width guide, it may
cause paper jam.
• If you are needed to add more sheets of
paper while printing, remove the
remaining paper from the tray at first.
Then, reinsert them with the new paper.
Note that adding new paper into the
remains in the tray may cause paper jams
or multiple feeding.
To AC outlet

Advertisement

loading

Summary of Contents for Samsung ML-1200 Series

  • Page 1 SAMSUNG LASER PRINTER Attach the supplied ML-1200 SERIES paper output support as shown. If any items are missing or damaged, notify your dealer immediately. Components may differ from one country to another. Remove the toner cartridge from its bag and remove the paper covering the cartridge.
  • Page 2 Reader program installed on your computer. If you do not have the 5.Check CD-ROM drive and click Browse, allows you to select and remove any or all of the Samsung ML-1200 Installing Printer Software program on your PC, click Install the Bonus Software on your PC to then choose x:\USB.