Table of Contents
Advertisement
2-7
Frequency/Voltage Control
CPU Clock Ratio
Memory Frequency For
Memory Frequency (Mhz)
: Move
Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power end-user use only.
CPU Clock Ratio
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
Memory Frequency For
Wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue.
for FSB(Front Side Bus) frequency =400Mhz,
2.66
Memory Frequency = Host clock x 2.66.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=533Mhz,
2.0
Memory Frequency = Host clock x 2.
2.5
Memory Frequency = Host clock x 2.5.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
for FSB(Front Side Bus) frequency=800Mhz,
1.33
Memory Frequency = Host clock x 1.33.
1.6
Memory Frequency = Host clock x 1.6.
2.0
Memory Frequency = Host clock x 2.
Auto
Set Memory frequency by DRAM SPD data. (Default value)
Memory Frequency (Mhz)
The values depend on CPU Host Frequency(Mhz) and Memory Frequency For.
GA-8I865GME Motherboard
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
Frequency/Voltage Control
[21X]
[Auto]
266
+/-/PU/PD: Value
F6: Fail-Safe Defaults
- 40 -
Menu Level
Set CPU Ratio if CPU
Ratio is unclocked
F10: Save
ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
Advertisement
Table of Contents
