Gigabyte Pentium 4 Processor Motherboard GA-8I865GME User Manual page 20

3/4/5) CPU_FAN / SYS_FAN / PWR_FAN* (Cooler Fan Power Connector)
The cooler fan power connector supplies a +12V power voltage via a 3-pin power connector and
possesses a foolproof connection design.
Most coolers are designed with color-coded power connector wires. A red power connector wire
indicates a positive connection and requires a +12V power voltage. The black connector wire is the
ground wire (GND).
Please remember to connect the power to the cooler to prevent system overheating and failure.
Caution!
Please remember to connect the power to the CPU fan to prevent CPU overheating and failure.
6) FDD (FDD Connector)
The FDD connector is used to connect the FDD cable while the other end of the cable connects to the
FDD drive. The types of FDD drives supported are: 360KB, 720KB, 1.2MB, 1.44MB and 2.88MB.
Please connect the red power connector wire to the pin1 position.
* Only for DB customer.
GA-8I865GME Motherboard
1
Pin No.
CPU_FAN
1
PWR_FAN*
1
SYS_FAN
2
1
- 20 -
Definition
1 GND
2 +12V
3 Sense
34
33