Table of Contents
Advertisement
2-4
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2006 Award Software
ACPI Suspend Type
Power LED in S1 state
Off by Power button
PME Event Wake Up
ModemRingOn/WakeOnLan
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
Power On By Mouse
Power On By Keyboard
x KB Power ON Password
AC BACK Function
: Move
Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS)
Set ACPI suspend type to S1/POS(Power On Suspend). (Default value)
S3(STR)
Set ACPI suspend type to S3/STR(Suspend To RAM).
Power LED in S1 state
Blinking
In standby mode(S1), poer LED will blink. (Default value)
Dual/OFF
In standby mode(S1):
a. If use single color LED, power LED will turn off.
b. If use dual color LED, power LED will turn to another color.
Off by Power button
Instant-off
Press power button then Power off instantly. (Default value)
Delay 4 Sec.
Press power button 4 sec. to Power off. Enter suspend if button is pressed less than
4 seconds.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled
Disable this function.
Enabled
Enable PME as wake up event. (Default value)
ModemRingOn/WakeOnLan
An incoming call via modem can awake the system from any suspend state or an input signal comes
from the other client server on the LAN can awake the system from any suspend state.
Disabled
Disable Modem Ring On / Wake On LAN function.
Enabled
Enable Modem Ring On / Wake On LAN function. (Default value)
Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Date/Time to power on system.
Disabled
Disable this function. (Default value)
Enabled
Enable alarm function to POWER ON system.
If Resume by Alarm is Enabled.
Date (of Month) Alarm :
Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59)
Power Management Setup
[S1(POS)]
[Blinking]
[Instant-Off]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
[Disabled]
[Disabled]
Enter
[Soft-Off]
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
Everyday, 1~31
- 37 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup
Advertisement
Table of Contents
