MHSC MJ27NR Installation And Operating Instructions Manual page 25

5. Place Log #4 by matching the rect-
angular protrusion on the bottom of
this log over the rectangular notch on
log #3. Swing the log slightly to the
front and set the log over the notch
located on the upper surface of log
#3. Figure 24
Log #5
LG547
7. Place log #6 at an angle over log
#5 toward the back by matching
the rectangular notch on the bot-
tom of this log with the rectangular
protrusion on log #5. Set the notch
located on the bottom of this log
toward the back over the metal
bracket located to the left side of
the burner. Figure 26
Figure 26 -
Place Log #6
86D0024
Figure 24 -
Install Log #4
LG547
MLDV log #5
Log #4
LG546
6. Place log #5 by matching the rectangular
MLDV log #4
notch on the bottom of the log with the rect-
angular protrusion on log #2. Set the notch
on the bottom of this log over the very far
left tong on the grate. Figure 25
Figure 25 -
Install Log #5
Log #6
LG548
MLDV log 6
LOG PLACEMENT
LG546
LG548
25