MHSC MJ27NR Installation And Operating Instructions Manual page 24

LOG PLACEMENT
2. Place log #1 by setting the log over the
rear bracket over the two pins. Figure
21
4. Place log #3 at an angle over log #2
toward the back by matching the rectan-
gular notch on the bottom of this log with
the rectangular protrusion on log #2. Set
the notch located on the bottom of this log
toward the back over the metal bracket
located to the right side of the burner.
Figure 23
24
Log #8
LG553
MJ127 log 8
10/08
Figure 21 -
Install Log #1
Log #2
LG555
MJ127 Log #2
10/08
Figure 23 -
Install Log #3
1. Place log #8 on right bracket next to
valve by sliding grooves on sides of
log into cutout on brackets. Figure
20
Figure 20 -
Install Log #8
LG553
LG554
MJ127 log 1
10/08
3. Place log #2 at an angle across
the burner by setting the log over
the two pins located on top of the
burner. Figure 22
Figure 22 -
Install Log #2
LG555
Log #3
Log #1
LG554
LG545
86D0024