Installing The Waste Toner Box; Mounting The Accessory Parts; Installing The User’s Guide Holder/Spacer; Installing The Set Guide For Banner Paper - Konica Minolta bizhub C360 Installation Manual

VIII. Installing the waste toner box
1. Remove the protective tape from the furnished
waste toner box.
A0EDIXC024DA
2. Install the waste toner box.
A0EDIXC025DA
3. Close the front door.
A0EDIXC023DA
IX. Mounting the accessory parts
1. Attach the cap A and B furnished with the
machine.
A0EDIXC026DA
2. Set the panel pen in the pen holder at the control
panel.
A0P0IXC055DA
X. Installing the user's guide holder/
spacer
Install the user's guide holder and the spacer.
A0EDIXC027DA
XI. Installing the set guide for banner
paper
1. Affix a furnished label to the set guide for banner
paper as shown in the illustration.
Note:
Select a label that fits onto the machine from the
furnished labels.
2. Open the manual bypass tray and set the set
guide for banner paper.
XII. Connecting the power cord
1. Remove the screw at the rear of the machine.
E-4
2. Connect the power cord.
3. Fit the cord clamp furnished with the machine
over the power cord (one screw).
Note:
Use the screw removed in step 1.
A0EDIXC033DA
4. Plug the power cord into the power outlet.
A02EIXC040DB
A0EDIXE044DA
A0EDIXE038DA
A0EDIXE039DA
C4004U139CA