(6
) OSD Menu joystick: Use the joystick to move the curso
select the item to be set.
Tilt the stick to the right or
Press in on the stick to enter the setup menu. If the item has its own setting menu (sign
the stick again to display the sub- menu.
(7) Power & HD-CCTV Video pigtail cable
Connect power and HD-CCTV video to pig
2.3 Related Product
In addition, you may order the fo
camera to achieve the best performance:
L
Type Bracket: BA-EDMS
E
N220 5.6 inch LCD Test Monitor
3. INSTALLATION
This chapter will describe, in general terms, how to install the EHH5200 camera.
STEPS:
3.1. Mounti
ng Camera:
1. Drill the Holes. See
2. Mounting: See 3.1.2
3.2
. Adjusting Camera:
1. Adjust the camera
2. Adjusting Zoom and Focus See 3.2.2
3. Camera Setting. See 3.2.3
4. How to close camera cover
W
arning
To prevent electrical shock, turn off the electrical power before making electrical connections.
Do not expose the camera to water or moisture while open during installation, nor try to operat
it while open in wet areas. Once properly installed and sealed, the dome is IP66 rated against
water infiltration.
left. This is used to select or adjust the parameters of the selected item.
tail cable
s
llowing EverFocus products which are recommended for use with the
3.1.1
position. See 3.2.1
after installation. See 3.2.4
r Upwards/Downwards. This is used to
- 9 -
), pres
s
e