Video And Audio; Other - Integra DTR-8.3 Instruction Manual

Troubleshooting guide

VIDEO and AUDIO

Desired picture does not appear.
• Improper connection.
© Check connections. Insert the plugs and connectors
completely (see pages 16 to 29).
• Video Setup Sub-menu settings are incorrect.
© Check settings at Setup Menu → Input Setup Menu → Video
Setup Sub-menu (see page 51).
No OSD Menu display.
• Improper connection.
© Check connections (see pages 16 to 29).
Audio and video do not match.
• Improper connection.
© Check connections (see pages 16 to 29).
• Video Setup Sub-menu settings are incorrect.
© Check settings at Setup Menu → Input Setup Menu → Video
Setup Sub-menu (see page 51).
Audio is not heard or audio from different source is
heard.
• Digital Setup Sub-menu settings are incorrect.
© Check settings at Setup Menu → Input Setup Menu → Digital
Setup Sub-menu (see page 49).
No picture appears on the TV screen (or monitor).
• TV (or monitor) is not set to receive the output signals from the
receiver.
© Set the TV (or monitor) to the receiver input.
• Video cable is not connected securely.
© Check connections (see pages 16 to 29).
• Input source is connected to the COMPONENT VIDEO IN
connectors.
© Make sure TV (or monitor) is connected to COMPONENT
VIDEO OUT connectors (see page 19).

OTHER

LATE NIGHT function cannot be used.
• Playback source is not Dolby Digital encoded.
© Check that the DOLBY DIGITAL indicator lights up on the
display.
Re-EQ function cannot be used.
• Re-EQ may not be able to be set due to current listening mode.
© Select different listening mode (see page 61).
Desired parameter cannot be set.
• Parameter may not be able to be set due to current listening
mode.
© Check settings in Audio Adjust Menu (see pages 56 to 61).
Multichannel audio is not output.
• The Multichannel setting is set to "No."
© Set the Multichannel setting to "Yes" at Setup Menu → Input
Setup Menu → Multichannel Setup Sub-menu (see page 50).
• Input source is not connected to MULTI CHANNEL INPUT
port.
© Check connections (see pages 16 to 29).
Components in remote zone (Zone 2) do not operate
properly.
• Components are incorrectly connected.
© Check connections.
• Objects are interfering with remote controller signals.
© Move inferring objects away from path of remote controller
signals.
Sound is sometimes heard and sometimes not heard
with digital sources.
• One digital input format has been specified so other digital
formats are not played.
© Select "All" at Setup Menu → Input Setup Menu → Digital
Setup Sub-menu → Digital Format (see page 49).
Noise during playback or skipping of the beginning
sounds occurs with DTS sources, PCM sources, and
other digital sources.
• When "All" is set for the digital format setting, time is required
to change formats when different sources are played.
© Try specifying the format you are playing at Setup Menu →
Input Setup Menu → Digital Setup Sub-menu → Digital
Format (see pages 49).
The unit cannot be switched to Dolby EX or DTS-ES
mode.
• "Surr Back/Zone 2" is set to "Zone 2."
© Change the Hardware Setup → Surr Back/Zone 2 Sub-menu
setting to Surr Back (see page 45).
83