Table of Contents
Advertisement
00_DV-SP301.book Page 15 Friday, April 18, 2003 4:18 PM
If your TV has Component Input connector
If the TV or monitor has component video inputs, making this type
of video connection will produce ideal picture quality for the
presentation of DVD-Video. Using a component video cable (sold
separately), connect the VIDEO OUTPUT COMPONENT jacks
to the corresponding component video input jacks on the TV.
Actual labels for component video inputs may vary depending on
the TV manufacturer. (e.g., Y, R-Y, B-Y or Y, C
In some TVs or monitors, the color levels of the playback picture
may be reduced slightly or the tint may change. In such a case,
adjust the TV or monitor for optimum performance.
In the same manner, make audio connections from the ANALOG
OUTPUT L and R jacks to the corresponding audio input jacks on
the TV.
This connection is necessary to use progressive function.
To view Progressive scan video, you need a TV with Progressive
scan capability. Please check your TV's manual.
Signal flow
Signal
flow
AUDIO OUTPUT
DIGITAL
ANALOG
OPTICAL
COAXIAL
L
MODEL NO.
R
B
, C
R
)
Audio/video cable (supplied)
Audio (L)
Audio (R)
Component video cable (not supplied)
P
R
P
B
Y
To component video inputs
VIDEO OUTPUT
COMPONENT
P
R
VIDEO
DVD PLAYER
P
B
DV-SP301
S VIDEO
Y
Notes
• The DVD Player can output NTSC or PAL format video
depending on the setting on page 34. Make sure your TV
supports the disc's video format.
• Progressive scan can only works with NTSC format discs.
To audio inputs
L
Audio (L)
AUDIO
R
Audio (R)
P
R
P
R
P
B
P
B
Y
Y
REMOTE
CONTROL
Connect the power cord
after all connections are
complete.
15
Advertisement
Table of Contents
