Table of Contents
Advertisement
00_DV-SP301.book Page 10 Friday, April 18, 2003 4:18 PM
Control Position and Names
Front Panel
For operational instructions, see the page indicated in brackets [ ].
1 2
1
POWER button [17]
Turns on the main power supply.
2
STANDBY/ON button [17]
Toggle for standby and on.
3
STANDBY indicator [17]
Lights in the standby mode.
4
Disc tray [18]
5
OPEN/CLOSE 0 button [18]
Press to open or close the disc tray.
6
STOP 7 button [18]
Stops playing a disc. When disc is playing, if you press STOP
7 and PLAY £, the disc will start resume play. When STOP
7 is pressed again during stop mode, the resume function is
canceled.
Rear Panel
For operational instructions, see the page indicated in brackets [ ].
AUDIO OUTPUT
DIGITAL
ANALOG
OPTICAL
COAXIAL
1 2 3
1
DIGITAL OUTPUT OPTICAL jack [16]
Use optical cable to connect your DVD Player to an AV com-
ponent that features digital input capability. If the component
has a Dolby Digital or DTS decoder, you can enjoy theater-
quality multichannel sound.
2
DIGITAL OUTPUT COAXIAL jack [16]
Use coaxial cable to connect your DVD Player to an AV com-
ponent that features digital input capability. If the component
has a Dolby Digital or DTS decoder, you can enjoy theater-
quality multichannel sound.
3
ANALOG OUTPUT jacks [13-16]
Insert audio cables (left and rights) to these jacks on your DVD
Player and to the corresponding Audio Input jacks (left and
right) on your TV or receiver.
4
VIDEO OUTPUT VIDEO jack [13]
Connect a video cable to this jack and to the Video Input jack
on your TV.
5
VIDEO OUTPUT S VIDEO jack [14]
10
If your TV has a S-Video jack, you can connect an S-Video
3
8
L
DVD PLAYER
VIDEO
DV-SP301
MODEL NO.
R
S VIDEO
4
5 6
4
9
7
PLAY/PAUSE £/8 button [18]
Begins to play disc (close disc tray first if it is open).
Temporarily stops playback when a disc is playing. Press this
button again for normal playback.
8
Remote Control sensor [9]
9
Display [11]
0
SKIP 4/¢ buttons [19, 21]
Allow you to move to the previous chapter or track / the next
chapter or track on a disc.
-
SEARCH 1/¡ buttons [19, 21]
Allow you to search through a disc while it is in play mode.
The search speed changes each time you press this button.
VIDEO OUTPUT
COMPONENT
P
R
REMOTE
CONTROL
P
B
Y
7
cable to your TV and to your DVD Player for improved video
quality. The S-Video cable only carries the video signal;
remember to connect the left and right audio cables.
6
VIDEO OUTPUT COMPONENT (P
If your TV has component inputs, you can connect a compo-
nent video cable to your TV and to your DVD Player for ideal
video quality. The component video cable only carries the
video signal; remember to connect the left and right audio
cables. If you connect a TV that is compatible with a Progres-
sive scan signal, you can enjoy both Interlaced and Progressive
scan.
Note
Progressive scan only works with NTSC format discs.
7
z jacks [16]
Connect z jacks (Remote Interactive) cable to this jack and
to another Onkyo AV component for synchronized control.
Note
You must make an analog RCA/phono connection, even if you
connect digitally.
5
6
7
0
-
/P
/Y) jacks [15]
R
B
Advertisement
Table of Contents
