Windshield Washer Fluid; What To Use; Adding Washer Fluid - Chevrolet 2004 Epica Owner's Manual

Windshield Washer Fluid

What to Use

When you need windshield washer fluid, be sure to
read the manufacturer's instructions before use. If you
will be operating your vehicle in an area where the
temperature may fall below freezing, use a fluid that
has sufficient protection against freezing.

Adding Washer Fluid

The windshield washer fluid reservoir is located in the
front of the engine compartment on the passenger's
side of the vehicle. See Engine Compartment Overview
on page 5-12 for reservoir location.
Add washer fluid until the tank is full.
Open the cap with the
washer symbol on it.
Notice:
•
When using concentrated washer fluid, follow
the manufacturer's instructions for adding
water.
•
Do not mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts
of the washer system. Also, water does not
clean as well as washer fluid.
•
Fill your washer fluid tank only three-quarters
full when it is very cold. This allows for
expansion if freezing occurs, which could
damage the tank if it is completely full.
•
Do not use engine coolant (antifreeze) in your
windshield washer. It can damage your washer
system and paint.
5-31