Preparing, Setting And Using Your Remote Control; Mode Setting; Volume And Mute Control Setting; Changing The Brand Setting Of Your Remote Control For Tv, Vcr, Dvd Or Amplifier-Tuner - Philips DTR6600 User Manual

4

Preparing, setting and using your Remote Control

4.1 Installation of batteries
●
●
●
●
4.2 Setting of your remote
control

4.2.1 Mode setting

P R E PA R I N G S E T T I N G U S I N G R E M O T E C O N T R O L
➔ ➔ ➔ ➔

4.2.2 Volume and mute control setting

Note: we recommend Volume and mute control via your digital
receiver. Refer to chapter 4.2.2.1 for setting.
4.2.2.1 You want the remote to control the volume
and mute via your digital receiver (recom-
manded).
1
2
3
4
4.2.2.2 You want the remote to control the volume
and mute of your TV set / Set volume
control to TV.
Note: to set or reset the volume/mute control to TV follow
procedure below:
1 Select the STB mode.
2 Press simultaneously 1 and 9 buttons until the LED blinks
twice then release the buttons.
3 Enter code 993, the LED is blinking once after each entry.
4 Press the "yellow" button, the LED shall blink twice to
acknowledge the new setting.
4.2.3 Changing the brand setting of your
remote control for TV, VCR, DVD or
Amplifier-Tuner