Service Mode; Starting Service Mode; Exiting Service Mode; Functions Of The Service Mode - Electrolux Refrigerator Service Manual

To start the procedure perform the following operations:
1. Connect the plug to the socket.
2. Switch on the appliance with the ON/OFF button.
3. Open the doors of the appliance.
4. Switch the appliance off with the ON/OFF button.
5. Within the first 10 seconds hold down the two buttons "temperature displaying" and "function activation"
simultaneously.
The confirmation of the procedure start occurs with the acoustic signalling of the buzzer which emits a long beep
and with the lighting up of the LCD display.
The procedure terminates when one of the following conditions is satisfied:
a. The plug is detached from the socket and replugged.
b. 40 minutes have elapsed and no button has been pushed.
c. The last phase of the procedure has been reached.
Press the "displaying temperature" button to skip to the following phase of the procedure.
Press the "ON/OFF" button to activate/deactivate the loads (compressor, defrosting heater, lamp, fan and air
flow regulator).
List of the phases of the SERVICE MODE:
1. All the segments of the display are on.
2. All the segments of the display are off.
3. The number +0 is shown on the display and the load controlled by the ACS TH1 [compressor] is
checked.
To activate/deactivate the load press the "ON/OFF" button (the load is activated when the SUPER
function symbol
4. The number +1 is displayed and the load controlled by ACS TH2 [defrosting heater] is checked.
To activate/deactivate the load press the "ON/OFF" button (the load is activated when the SUPER
function symbol
5. The number +2 is shown on the display and the load controlled by the ACS TH3 [lamp] is checked.
To activate/deactivate the load press the "ON/OFF" button (the load is activated when the SUPER
function symbol
6. The number +3 is shown on the display and the load controlled by the ACS TH4 [fan] is checked.
To activate/deactivate the load press the "ON/OFF" button (the load is activated when the SUPER
function symbol
7. The number 00 (= damper closed) or 0F (= damper open) is shown on the display and the air flow
regulator (damper) is checked.
TOTAL NO FROST FIFTY SLIDING DOOR

11. SERVICE MODE

11.1. Starting SERVICE MODE

11.2. Exiting SERVICE MODE

11.3. Functions of the SERVICE MODE

is displayed).
is displayed).
is displayed).
is displayed).
37/39