Connecting Component Video - Insignia NS-LCD22 User Manual

NS-LCD22.fm Page 7 Monday, February 19, 2007 1:39 PM
Insignia NS-LCD22 LCD TV
Connecting a VCR (for recording)
VCR for recording
AV cable
Connect the Audio/Video cables between the
Audio (L/R)/Video jacks on the television and
VCR.
Note
Cables are often color-coded to connectors.
Connect red to red, white to white, and yellow to
yellow.
Note
Only analog TV programs or AV input source can
be output through the AV output jacks.
To record a program:
1 Turn on your television, then select a program
you want to record.
2 Turn on your VCR, then insert a videotape for
recording.
3 Press the Record button to begin recording.
Connecting a camcorder or video game
console
Camcorder
OR
AV cable
Video game
console
Connect the Audio/Video cables between the
Audio (L/R)/Video jacks on the television and
camcorder or video game console.
Note
Cables are often color-coded to connectors.
Connect red to red, white to white, and yellow to
yellow.
Note
• For better video, you can use the S-video
terminal if your source supports it.
• The S-video terminal shares the same audio
jacks with VIDEO and has priority over the
VIDEO jack. To use a device connected to the
video jack, disconnect any plug from the
S-video terminal.
To play the camcorder:
1 Turn on your television, then press the INPUT
button. The SOURCE INPUT menu opens.
2 Press
press ENTER to confirm.
3 Turn on your camcorder and set it to output
mode.
4 Insert a videotape, then press
Note
For more information about using your camcorder
or video game console, see your user guide.
TV Rear
Connecting a HDMI device
Device with HDMI output
Connect the HDMI cable between the HDMI
interface on the television and HDMI output on
the device.
To play from the device using HDMI:
1 Turn on your television, then press the INPUT
button. The SOURCE INPUT menu opens.
2 Press
ENTER to confirm.
3 Turn on your device and set it to the correct
mode.
Note
TV rear
For more information about using your HDMI
device, see your user guide.

Connecting component video

Device with component video
To connect the device:
1 Connect the component video cable between
the Y, Cb/Pb, Cr/Pr input jacks on the
television and the Y, Cb/Pb, Cr/Pr output
jacks on the device.
2 Connect the audio cable between the AUDIO
input jacks on the television and the AUDIO
output jacks on the device.
Note
Cables are often color-coded to connectors.
Connect red to red, white to white, green to green,
and blue to blue.
To play component video from a device:
1 Turn on your television, then press the INPUT
button. The SOURCE INPUT menu opens.
www.insignia-products.com
or to select Composite, then
.
HDMI cable TV rear
or to select HDMI, then press
Audio cable
Component video cable
TV rear
7