Changing Channels; Selecting A Digital Sub-Channel; Adjusting The Volume; Displaying Status Information - Insignia NS-LCD15-09 User Manual

Insignia NS-LCD15-09 15.6" LCDTV 720P

Changing channels

To change channels:
• Press CH or CH
to go to the next lower or higher channel.
Or
Press the number buttons to directly select a
channel (for example, if you want channel 83,
press 8, then press 3).
Or
Press RECALL to go to the last viewed
channel.

Selecting a digital sub-channel

Most digital TV channels have more than one
channel. The main channel carries the signal for
the main TV program. The sub-channels carry
signals for additional or alternate programming,
such as a radio or news broadcast.
For example, if the main channel number is 8,
the sub-channel number might be 8-1, 8-2, or
8-3.
To select a sub-channel:
1 Press the number buttons for the main
channel (for example 8).
2 Press –, then press the sub-channel button
(for example 1).

Adjusting the volume

To adjust the volume:
• Press VOL – or VOL + to decrease or
increase the volume.
• Press MUTE to turn off the sound. Press
MUTE again to turn the sound back on.

Displaying status information

To display status information:
• Press DISPLAY. Your TV displays status
information, such as the channel number or
signal source.

Checking the DTV signal strength

To check the DTV signal strength:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press to enter the sub-menu, then press
or to highlight DTV Signal. The DTV
signal meter opens.
3 Press MENU or EXIT to close the menu.
on the remote control
www.insignia-products.com

Adding a channel label

To add a label to a channel:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press to enter the sub-menu, then press
or to highlight Channel Labels. The
Channel Label menu opens.
3 Press or to move the cursor to the
channel field, then press
channel.
4 Press or to move the cursor to the label
field, then press
character.
5 Press ENTER to return to the previous menu.

Freezing the picture

You can freeze (still) the screen image.
Caution
To protect your TV, do not freeze the screen image
for long periods of time.
To freeze or unfreeze the picture:
• Press FREEZE.

Setting the clock

To set the clock:
1 Press MENU. The on-screen display menu
opens with Setup highlighted.
2 Press or
Feature. The Feature menu opens.
3 Press to enter the sub-menu, then press
to highlight Time Set. The Time Set
or
menu opens.
4 Press or
then press or
5 Press MENU or EXIT to close the menu.
or to select a
or to select the
repeatedly to highlight
ENTER
move to the different fields,
to change the settings.
9