Specifications - Insignia NS-L42Q-10A User Manual

Problem
Remote control does not work
Snowy picture or noise
VGA picture is not stable or
synchronized
No output from one of the speakers
Control buttons do not work
After images appear
Picture has a few bright or dark dots
48
Solution
• Press TV (not the color button)
• Replace the batteries. Make sure
that the + and – symbols on the
batteries align with the + and –
symbols in the battery
compartment.
• Clean the remote sensor on the
front of your TV.
• Bright or fluorescent lighting may
interfere with the remote control
signal. Turn off the light or move
your TV.
• Make sure that the A/V and
antenna cables are connected
correctly and securely.
• Make sure that you have selected
the correct VGA mode on your
computer.
• Adjust the balance in the Audio
menu.
• Make sure that the Button Lock
option is set to Off. For more
information, see "Locking control
buttons" on page 26.
• Unplug the power cord, wait a few
seconds, then plug the cord back in
and turn on your TV.
• Do not display a still image, such as
a logo, game, or computer image,
for an extended period of time. This
can cause a permanent after-image
to be burned into the screen. This
type of damage is not covered by
your warranty.
• A few bright or dark dots on an LCD
screen is normal. It does not affect
the operation of this TV.
www.insigniaproducts.com

Specifications

Design and specifications are subject to change
without notice.
Analog standard NTSC
Digital standard ATSC, 8-VSB, Clear-QAM
Screen NS-L37Q-10A: 37"
NS-L42Q-10A: 42"
Channel coverage VHF: 2-13
UHF: 14-69
CATV: Mid band - A-8 ~ A-1, A ~ I
Super band - J ~ W
Hyper band - AA ~ ZZ, AAA, BBB
Ultra band - 65 ~ 94, 100 ~ 135
Power source AC 120 V ~ 60 Hz
Power consumption 37": 220 W with TV on
42": 250 W with TV on
<1 W in standby mode
Audio power 12 W + 12 W internal speaker
S-Video input (2) Y: 1 V (p-p), 75 ohm, negative sync
C: 0.286 V (p-p) (burst signal), 75 ohm
Video/audio input (2) Video: 1 V (p-p), 75 ohm, negative sync
Audio: 300 mV (rms)
Component input (2) Y: 1 V (p-p), 75 ohm, including sync
Pr/Cr: ±0.35 V (p-p), 75 ohm
Pb/Cb: ±0.35 V (p-p), 75 ohm
Audio: 300 mV (rms)
Suggested resolutions: 1080P, 1080i, 720p, 480p,
480i
HDMI input (4) 4 HDMI input jacks
HDCP compliant
E-EDID compliant
Suggested scan rates: 1080p, 1080i, 720p, 480p,
480i
VGA input E-EDID compliant
Suggested scan rates: 640x480/60 Hz,
800x600/60 Hz, 1024x768/60 Hz,
1920x1080/60 Hz
Audio input: Headphone mini-jack for stereo
Accessories Remote control and batteries (2 AA)
Remote control holder
AC power cord
Component cable
Cleaning cloth
User guide
Quick Setup Guide