Playing Tv Audio Only; Changing Channel Settings; Automatically Scanning For Channels - Insignia NS-L42Q-10A User Manual

• Equalizer (set to On)—You can adjust the
following options by pressing
the option:
• Equalizer Mode—Selects the equalizer
mode. You can select Custom, Standard,
Theater, Music, and News. Press
OK/ENTER after you make your selection.
• Equalizer Settings—Set the equalizer
frequency. You can select 120Hz, 500Hz,
1.5kHz, 5kHz, or 10kHz. Press
adjust the settings. Press
between columns. Press MENU to confirm
the settings.
You can adjust the following options regardless
of the Equalizer setting:
• Balance—Adjusts the sound between the left
and right speakers.
• Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select RAW
or PCM.
• MTS/SAP—Selects the sound mode (for
analog channel only).
• Mono—Produces a clearer sound if stereo
sound is difficult to hear.
• Stereo—Produces dynamic stereo sound
for sporting events and concerts.
• SAP—Selects a second language, weather,
or added commentary, if available.
• Audio Language—Selects the audio
language based on the languages supported
by a DTV channel.
• Auto Volume—Automatically adjusts volume
to be consistent across programs and
channels. You can select On or Off.
• Reset Audio Settings— Reset all audio
settings to factory defaults. When you select
this option, a confirmation box opens. Press
or to select Yes or No, then press OK/ENTER
to confirm.
6 Press or to modify a scale or to move from
left to right to make a choice in a submenu.
Press or to move up or down when
selecting from a list of choices in a submenu.)
7 Press MENU to go to the previous menu or EXIT
to close the menu.

Playing TV audio only

When watching TV, you can turn off the TV picture
and listen to the audio only.
To play TV audio only:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed.
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
OK
MOVE
ENTER
Adjust settings to affect picture quality
or to select
or
or to switch
PICTURE
AUDIO CHANNELS SETTINGS
Vivid
42
45
54
0
+5
SELECT PREVIOUS EXIT
MENU EXIT
www.insigniaproducts.com
2 Press
menu opens.
Channels
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
to
Channel Strength
Audio Only
Adjust channel options
3 Press
OK/ENTER or
4 Press
Note

Changing channel settings

Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.

Automatically scanning for channels

When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH or CH , your TV goes to the next or previous
channel in the channel list and skips the channels
that do not have signals.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
To automatically scan for channels:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed.
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
Adjust settings to affect picture quality
or to select CHANNELS. The Channels
CHANNELS
PICTURE AUDIO
OK
MOVE SELECT PREVIOUS
MENU
ENTER
to highlight Audio Only, then press
to access the sub-menu.
or to select On or Off.
• It takes about 3 seconds after the menu closes
and the picture disappears before the audio
plays.
• Audio Only works only when the input source is
TV and your TV is receiving a broadcast signal.
• To exit Audio Only mode, press any button.
When you exit Audio Only mode, the Audio
Only option is automatically reset to Off.
PICTURE
AUDIO CHANNELS
OK
MOVE SELECT PREVIOUS
MENU
ENTER
SETTINGS
Off
EXIT
EXIT
SETTINGS
Vivid
42
45
54
0
+5
EXIT
EXIT
19