Connecting Headphones; Connecting A Digital Audio Amplifier; Connecting An Analog Audio Amplifier - Insignia NS-L42Q-10A User Manual

2 Connect an audio cable to the PC IN AUDIO jack
on the back of your TV and to the AUDIO OUT
jack on the computer.
3 Turn on your TV, then turn on the computer.
4 Press INPUT to open the Source List, then
press or to select VGA.
Note
When the computer enters standby mode, your TV
turns off. If your TV does not turn on when you
"wake" your computer, press
or remote control.

Connecting headphones

To connect headphones:
• Plug headphones into the
of your TV.
Note
When headphones are plugged in, the sound from
your TV's speakers is muted.

Connecting a digital audio amplifier

To connect a digital audio amplifier:
• Connect a digital audio cable to the SPDIF
jack on the back of your TV and to the digital
audio jack on the amplifier.
Back of TV
14
(power) on your TV
jack on the side
Side of TV
Audio amplifier
www.insigniaproducts.com

Connecting an analog audio amplifier

To connect an analog audio amplifier to your TV:
• Connect a standard audio cable to the
AUDIO OUT L and R audio jacks on the back
of your TV and to the AUDIO IN jacks on the
amplifier.
Back of TV
Audio amplifier