Specifications - Insignia NS-L26Q-10A User Manual

Problem
No output from one of the speakers
Control buttons do not work
After images appear
Picture has a few bright or dark dots
32
Solution
• Adjust the balance in the Audio
menu.
• Make sure that the Button Lock
option is set to Off. For more
information, see "Locking control
buttons" on page 26.
• Unplug the power cord, wait a few
seconds, then plug the cord back in
and turn on your TV.
• Do not display a still image, such as
a logo, game, or computer image,
for an extended period of time. This
can cause a permanent after-image
to be burned into the screen. This
type of damage is not covered by
your warranty.
• A few bright or dark dots on an LCD
screen is normal. It does not affect
the operation of this TV.
www.insigniaproducts.com

Specifications

Design and specifications are subject to change
without notice.
Analog standard NTSC
Digital standard ATSC, 8-VSB, Clear-QAM
Screen 26"
Channel coverage VHF: 2-13
UHF: 14-69
CATV: Mid band - A-8 ~ A-1, A ~ I
Super band - J ~ W
Hyper band - AA ~ ZZ, AAA, BBB
Ultra band - 65 ~ 94, 100 ~ 135
Power source AC 120 V ~ 60 Hz
Power consumption 100 W with TV on
<1 W in standby mode
Audio power 5 W + 5W internal speaker
S-Video input Y: 1 V (p-p), 75 ohm, negative sync
C: 0.286 V (p-p) (burst signal), 75 ohm
Video/audio input Video: 1 V (p-p), 75 ohm, negative sync
Audio: 300 mV (rms)
Component input Y: 1 V (p-p), 75 ohm, including sync
Pr/Cr: ±0.35 V (p-p), 75 ohm
Pb/Cb: ±0.35 V (p-p), 75 ohm
Audio: 300 mV (rms)
Suggested resolutions: 1080i, 720p, 480p, 480i
HDMI input 2 HDMI input jacks
HDCP compliant
E-EDID compliant
Suggested scan rates: 1080i, 720p, 480p, 480i
VGA input E-EDID compliant
Suggested scan rates: 640×480 /60 Hz, 800×600
/60 Hz, 1024×768 /60 Hz, 1360×768 /60 Hz
Audio input: Headphone mini-jack for stereo
Accessories Remote control and batteries (2 AAA)
Remote control holder
AC power cord
VGA cable
Component cable
Cleaning cloth
User guide
Quick Setup Guide