Resetting Settings To The Defaults; Programming Your Remote Control - Insignia NS-L42X-10A User Manual

Resetting settings to the defaults

To reset settings to the defaults:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed.
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
OK
MOVE
ENTER
Adjust settings to affect picture quality
2 Press or to select SETTINGS. The Settings
menu opens.
Settings
Parental Controls
Closed Caption
Time
Menu Settings
LOGO Brightness
Auto Input Sensing
OK
MOVE
ENTER
Set various TV options
Note
You may need to scroll down to see the Reset to
Default option.
3 Press to highlight Reset to Default, then
press OK/ENTER to confirm.
4 Press MENU to go to the previous menu or press
EXIT to close the menu.
Programming your remote
control
To program your remote to control home theater
devices, follow these steps.
Before proceeding, find the codes for the devices
you want to program in "Manufacturers' codes" on
page 37 and write them down or highlight them.
To program your remote control:
1 Turn on the device (for example, a DVD player)
and, if needed, load media such as a DVD.
2 Press the device key on the remote for the
device that you want to program (TV, DVD, STB,
or AUX).
3 Press and hold SET until the red LED blinks
twice, then release.
PICTURE
AUDIO CHANNELS SETTINGS
Vivid
42
45
54
0
+5
SELECT PREVIOUS EXIT
MENU EXIT
SETTINGS
PICTURE AUDIO CHANNELS
Low
On
SELECT PREVIOUS EXIT
MENU EXIT
www.insigniaproducts.com
4 Enter the first five-digit code for the device and
brand that you wish to program. The LED blinks
once as each digit is entered. If the code is valid,
the LED blinks twice.
Note
If the LED does not blink twice, repeat steps 2 to 4
and try entering the code again.
5 Aim the remote at the device and press
(power). The device should turn off. If it does
not, repeat Steps 3 through 5, trying each code
for your brand until you find one that works. If
you cannot find a code that works, see
"Searching for your code" below.
6 Repeat Steps 1 to 5 for the other devices you
want to control. For future reference, write down
each working device code.
Searching for your code
If your device does not respond to the remote
control after trying all codes listed for your brand, or
if your brand is not listed, try searching for your
code.
To search for your code:
1 Turn on the device you want to control.
2 Press the desired device key (TV, DVD, STB, or
AUX) once.
3 Press and hold SET until the red LED blinks
twice, then release.
4 Enter 9 9 1. The LED blinks twice.
5 Press the device group number for your device
type (see table below).
• 0—Cable (cable converters, video accessories,
satellite receivers)
• 1—TV (TVs)
• 2—VCR (VCRs, DVD players)
• 3—Audio (audio amplifiers, audio
amps/tuners, CD players)
6 Aim the remote at the device and press
(power). The remote sends IR codes from its
library to the selected device, starting with the
most popular code first. If the device responds,
go to Step 8.
7 If the device does not respond, press CH
the remote tests the next code for that device
type. Continue to press CH
turns off.
Note
Press CH
8 Now that you have found the correct code, press
SET to save the code that worked for your
device. The LED blinks twice to indicate that the
code has been saved.
9 To search for other device codes, repeat Steps 1
to 8.
until the device
to try the previous code.
and
33