Freezing The Picture; Adjusting The Sound - Insignia NS-L42X-10A User Manual

3 Press or to modify a scale or to move from
left to right to make a choice in a submenu.
Press or to move up or down when
selecting from a list of choices in a submenu.
4 Press MENU to go to the previous menu or EXIT
to close the menu.
Note
DCR works only when Light Sensor is set to off.

Freezing the picture

To freeze the picture:
• Press FREEZE. Press again to unfreeze the
picture.
Caution
Do not freeze the picture for long periods of time.
You may damage your TV's screen.

Adjusting the sound

Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Adjusting the sound
To adjust the sound:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed.
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
OK
MOVE
ENTER
Adjust settings to affect picture quality
2 Press or to select AUDIO. The Audio menu
opens.
Audio
Audyssey Dynamic Volume
SRS TruSurround HD
Treble
Bass
Balance
Digital Audio/SPDIF
OK
MOVE
ENTER
Adjust settings to affect sound quality
PICTURE
AUDIO CHANNELS SETTINGS
Vivid
42
45
54
+5
SELECT PREVIOUS EXIT
MENU EXIT
AUDIO
PICTURE CHANNELS SETTINGS
Medium
Off
32
32
0
RAW
SELECT PREVIOUS EXIT
MENU EXIT
www.insigniaproducts.com
3 Press
OK/ENTER to open the sub-menu. You can
select:
• Audyssey Dynamic Volume—Compensates
for sudden changes in audio volume. You can
select Off, Low, Medium, or Heavy.
• SRS TruSurround HD—Provides the ultimate
home theater sound solution. You can select
On or Off.
Note
• Treble—Adjusts high frequency sound.
• Bass—Adjusts low frequency sound.
• Balance—Adjusts the sound between the left
and right speakers.
• Digital Audio/SPDIF—Sends digital audio to
an external audio system. You can select RAW
or PCM.
• Audio Language—Selects the audio
language based on the languages supported
by a DTV channel.
• MTS/SAP—Selects the sound mode (for
analog channel only).
• Mono—Produces a clearer sound if stereo
• Stereo—Produces dynamic stereo sound
• SAP—Selects a second language, weather,
• Reset Audio Settings— Reset all audio
settings to factory defaults. When you select
this option, a confirmation box opens. Press
or
to confirm.
4 Press
left to right to make a choice in a submenu.
0
Press
selecting from a list of choices in a submenu.)
5 Press MENU to go to the previous menu or EXIT
to close the menu.
to highlight an option, then press
If you set the SRS TruSurround HD to On, Audyssey
Dynamic Volume will be set to Off automatically.
sound is difficult to hear.
for sporting events and concerts.
or added commentary, if available.
to select Yes or No, then press OK/ENTER
or to modify a scale or to move from
or to move up or down when
19