Understanding The Basics; Turning Your Tv On Or Off; Selecting The Video Input Source; On-Screen Menu Overview - Insignia NS-L42X-10A User Manual

Understanding the basics

Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.

Turning your TV on or off

To turn your TV on and off:
1 Make sure that the power cord is connected to
your TV and a power outlet.
2 Press (power) to turn on your TV. The power
indicator LED turns blue.
3 Press (power) again to turn off your TV. Your
TV enters Standby mode and the power
indicator LED turns red.
Warning
When your TV is off, power still flows into it. To
disconnect power, unplug the power cord.
Note
If your TV does not detect a signal and you do not
press any button for 15 minutes, your TV goes into
Standby mode automatically.

Selecting the video input source

To select the video input source when the
Picture mode is not set to Game or Game
Custom:
1 With your TV turned on, press INPUT. The Source
List opens.
Source List
Component 1
Component 2
2 Press or to highlight the video input source
your want. You can select:
• TV
• AV 1
• AV 2
• Component 1
• Component 2
• VGA
• HDMI 1
• HDMI 2
• HDMI 3
• HDMI 4
• HDMI 5
3 Press OK/ENTER.
TV
AV 1
AV 2
VGA
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
www.insigniaproducts.com
To select the video input source when the
Picture mode is set to Game or Game Custom:
1 With your TV turned on, press INPUT. The Game
Inputs source list opens.
Game Inputs
Component 2
2 Press or to highlight the video input source
your want. You can select.
• TV
• AV 2
• Component 2
• VGA
• HDMI 4
• HDMI 5
3 Press OK/ENTER.
To select the video input source using the input
buttons on the remote control:
• Press TV to select TV.
• Press VIDEO once to select AV 1(for AV1 IN
VIDEO or AV1 IN S-VIDEO).
• Press VIDEO twice to select AV 2.
• Press COMP once to select Component 1.
• Press COMP twice to select Component 2.
• Press HDMI once to select HDMI 1.
• Press HDMI twice to select HDMI 2.
• Press HDMI three times to select HDMI 3.
• Press HDMI four times to select HDMI 4.
• Press HDMI five times to select HDMI 5.
Note
If Auto Input Sensing is set to On, only the inputs
that have connected devices are active. The other
inputs are grayed and cannot be selected.

On-screen menu overview

Picture menu
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
OK
MOVE
ENTER
Adjust settings to affect picture quality
TV
AV 2
VGA
HDMI 4
HDMI 5
PICTURE
AUDIO CHANNELS SETTINGS
Vivid
42
45
54
0
+5
SELECT PREVIOUS EXIT
MENU EXIT
15