Chapter 2. Syslog Messages; Mu Disassociation Codes; Syslog Messages - Motorola WS5100 Series Troubleshooting Manual

2.1 Syslog Messages

The following table provides information and descriptions of Syslog Messages.
Number Mnemonic
1. AUTOUPCONFIG
2. AUTONOUPCONFIG
3. AUTOUPCLCONFIG
4. AUTOINSTCLCFGNOCOPY
5. AUTOUPNOCLCONFIG
6. AUTOINSTCLCFGNOREAD
7. AUTONOIMAGEUPODATE
8. AUTOIMAGEUPODATE
Syslog Messages &

MU Disassociation Codes

Severity Syslog Message
4 Loaded new startup config
4 Available config is same as
last loaded - will not be
reloaded
4 Loaded new cluster config
3 Could not overwrite the
cluster config file [str]
5 Available cluster config is
same as last loaded - will
not be reloaded
3 Could not read the cluster
config file [str]
5 Requested image matches
running image - will not be
loaded
5 Attempting to load
requested image
Meaning / Cause
If checksum compares for new and
running configurations are different –
new config overwrites the running
one. This may happen during auto-
install.
New and running configurations are
the same. This may happen during
auto-install.
If checksum for new and running
config are different – new config
overwrites the running one. This may
happen during
auto-install.
Copy temp to cluster-config failed.
Overwriting running-config with
cluster-config, wrong url path for files
display this error.
Config is the same.
Cluster config copy to temp failed.
New and installed image versions
match.
Local image version does not match
required image version.