Media Handling - Panasonic Diga DMR-EZ49V Operating Instructions Manual

Media handling

Inserting discs
1 Press [< OPEN/CLOSE] to open the tray.
Insert label-up.
2 Press [< OPEN/CLOSE] to close the tray.
Automatic drive select function
[DVD-V] [VCD] [CD]
≥If the unit is stopped, it automatically switches to the DVD drive
when a disc is inserted.
Note
≥When using DVD-RAM or DVD-R, remove the disc from the
cartridge. Cartridge discs cannot be used.
≥[RAM] It is not possible to record or play continuously from one side
of a double sided disc to the other. You will need to eject the disc
and turn it over.
Inserting, removing the USB memory
Inserting the USB memory
≥Before inserting any USB memory to this
unit, ensure that the data stored therein
has been backed up.
≥Check the orientation of the USB
connector and insert it straight in.
≥Insert an USB device while the unit is
stopped, so the "USB device" screen is
displayed. Select an item and press [OK]
to switch to the USB-related operations (
Removing the USB memory
≥Complete all USB-related operations and pull the USB memory
straight out.
≥If a USB memory being accessed is pulled out, then the data may
be damaged.
Inserting a video cassette
Insert a video cassette.
The surface on which you can see a roll of tape should face up.
The unit is automatically turned on.
To eject:
From the main unit
≥Press [< EJECT] on the main
unit.
From the remote control
≥Press [DRIVE SELECT] to
select VHS drive and then
press and hold [∫] for about 3
or more seconds.
∫ How to hold a disc
Do not touch the recorded surface.
∫ If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
∫ Handling precautions
≥Be careful about scratches and dirt.
≥Do not attach labels or stickers to discs. (This may cause disc
≥Write on the label side of the disc only with a soft, oil-based felt
≥Do not use record cleaning sprays, benzine, thinner, static
≥Do not use scratch-proof protectors or covers.
≥Do not drop stack, or impact discs. Do not place objects on them.
≥Do not use the following discs:
≥Do not place in the following areas:
38, 55).
≥To protect discs from scratches and dirt, return them to their cases
The manufacturer accepts no responsibility and offers no
compensation for loss of recorded or edited material due to a
problem with the unit or recordable media, and accepts no
responsibility and offers no compensation for any
subsequent damage caused by such loss.
Examples of causes of such losses are
≥A disc recorded and edited with this unit is played in a DVD Recorder
≥A disc used as described above and then played again in this unit.
≥A disc recorded and edited with a DVD Recorder or computer disc
Disc care
DO DO NOT
DO DO NOT
warping and un-balanced rotation, rendering it unusable.)
pen. Do not use ballpoint pens or other hard writing implements.
electricity prevention liquids or any other solvent.
– Discs with exposed adhesive from
removed stickers or labels (rental discs,
etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
– In direct sunlight.
– In very dusty or humid areas.
– Near a heater.
– Locations susceptible to significant difference in temperature
(condensation can occur).
– Where static electricity or electromagnetic waves occur.
when you are not using them.
or computer disc drive manufactured by another company.
drive manufactured by another company is played in this unit.
DO NOT
VQT2J52
15