Adf Power Rap - Xerox Phaser 790 Service Manual

005-211 ADF Power RAP

ADF Motor Power Error
Procedure
Remove the ADF Rear Cover. There is +24 VDC from pin 11 to pin 12 on J811.
Y N
Go to Flag 1. Check for an open circuit. If the wires are OK, go to the 001-712 RAP.
Check the fuse on the ADF Control PWB (PL 17.2). If the Fuse is OK, replace the ADF Control
PWB (PL 17.2).
Initial Issue
Phaser 790/DocuColor 2006
10/00
2-53
Status Indicator RAPs
005-211