Rep 5.7 Document Transport Assembly - Xerox Phaser 790 Service Manual

REP 5.7 Document Transport Assembly

Parts List on PL 17.6
Removal
To avoid personal injury or shock, do not perform repair activities with the power switch
on or electrical power applied to the machine.
1. Switch off the machine power and disconnect the machine Power Cord.
2. Remove the ADF Front Cover.
3. Remove the Document Transport Assembly. (Figure 1)
2
Remove the Document
Transport Assembly by
moving it in the direction
indicated
Figure 1 Removing the Document Transport Assembly
Initial Issue
Phaser 790/DocuColor 2006
WARNING
1
Loosen the
three screws
retaining the
Document
Transport
Assembly
Replacement
1. Perform the procedure for removal in reverse.
2. Perform an ADF Front-to-rear Positioning adjustment (ADJ 5.4)
10/00
4-31
Repairs and Adjustments
REP 5.7