Table of Contents
Advertisement
If the extender is detached
1. Line up the extender (1) with the left side of the
output tray. Make sure that the triangles (2) match,
to attach the extender correctly.
1
2. Snap the extender (3) into the unit by pushing down
the right side of the extender.
3
2
1. Introduction and Installation
1.7 Recording paper
The paper input tray unit can hold:
– Up to 250 sheets of 60 g/m
– Up to 230 sheets of 80 g/m
– Up to 200 sheets of 90 g/m
L Please refer to page 84 for information on recording
paper.
L The unit is set for printing A4 size paper by
default. If you want to use letter or legal size
paper, change the setting (feature #380 on page
50).
1
Pull the paper input tray (1) until it clicks into place,
then pull it completely out, lifting the front part of the
tray.
2
Before loading a stack of paper, fan the paper to
prevent paper jams.
2
2
to 75 g/m
paper.
2
paper.
2
paper.
1
13
Advertisement
Table of Contents
