Table of Contents
Advertisement
2. Preparation
2.2 Dialling mode
If you cannot dial (page 35), change this setting
according to your telephone line service.
1
{MENU} i {#}{1}{2}{0}
2
Press {1} or {2} to select the desired setting.
{1} "PULSE": For rotary/pulse dial service.
{2} "TONE" (default): For tone dial service.
3
{SET}
4
Press {MENU} to exit.
16
{MENU}
{SET}
DIALLING MODE
=TONE
[V^]
2.3 Selecting the operation mode
(Scan/Copy/Fax)
You can select the desired mode by pressing one of the
following buttons.
– {SCAN}: Select this mode when using the unit as a
scanner for the computer (page 27).
– {COPY}: Select this mode when using the unit as a
copier (page 30).
– {FAX}: Select this mode when using the unit as a fax
machine (page 35).
Note:
L The default operation mode is the copy mode.
L You can change the default operation mode (feature
#463 on page 50) and the timer before returning to
the default operation mode (feature #464 on page
50).
Advertisement
Table of Contents
