How To Assembly The Gears; How To Attach The Slider (Selection) - Sony HCD-MD555 Service Manual

4-19. HOW TO ASSEMBLE THE GEARS
3 Gear (Gear B)
Attach the gear so that
radius of the gear agrees
with that of "A" portion
as shown in the figure.
1 Move the slider (U/D) in the
direction of the arrow as far
as it can go.
2 Gear (U/D slider)
Gear of the slider (U/D)
Attach the gear so that the
gear engages with the bottom
gear of the slider (U/D) as shown
in the figure.

4-20. HOW TO ATTACH THE SLIDER (SELECTION)

2 Gear (chucking)
Rotary encoder
This portion must come
into the groove of the rotary
encoder.
1 Rotary encoder
Aligning the marks
Two marks must
be aligned.
A
— 35 —
4 Gear (Gear A)
Gear
(Gear B)
6 Two screws
(+PTP WHM 2.6)
5 Washer
4 Compression spring
7 Insert the slider (selection)
to "A" portion.
A
3 Protrusion of slider (selection)
Gear (Chucking)
Insert the protrusion into
the groove of the gear (chucking).
In line with this
straight line
Attach the gear so that
the gear is positioned in
line with the gear
(Gear B) as shown in
the figure.