Konica Minolta MAXXUM FLASH 5600HS (D) Instruction Manual page 57

1. Connect the flash units with off-cam-
era cables.
2. Switch all flash units on.
3. Press the mode button on the
5600HS (D) to display
data panel.
4. Press the select button repeatedly to
blink [RATIO].
5. Press the + or – button to select
or
• If is selected, it provides 1/3 of the
whole light intensity. If
of the whole intensity.
• Other flashes will provide the rest of the
light intensity automatically.
6. Press the select button repeatedly
until blinking stops.
7. Take the photo.
.
, it proveds 2/3
on the
57