Konica Minolta MAXXUM FLASH 5600HS (D) Instruction Manual page 37

• The flash indicator is not displayed after a photo is taken with
manual flash.
• ADI and pre-flash metering may be used with some camera-flash-lens
combinations. Both ADI and pre-flash metering are handled as a type
of TTL flash metering.
• Using custom functions, manual flash may be selected without setting
the camera in the M mode (p. 66).
3. Press the + or – button to
select the power level to be
set.
• The power level can be selected
from the following.
1/1, 1/2, 1/4, 1/8, 1/16, 1/32
• When the shutter-release button is
pressed partway down, the distance
where the proper exposure will be
obtained will appear in the data panel.
Proper exposure is obtained at less than 1.5m.
Proper exposure is obtained at more than 28m.
37