2
PREPARING THE CHASSIS
a
a. Remove the body pins (2 pcs.) and detach the body.
b. Straighten antenna and insert into antenna tube.
c. Put the antenna wire through the antenna pipe. (Do not cut or shorten antenna wire.!) Push the antenna pipe into the chassis
mount hole.
a.
b.
c.
3
INSTALLING RADIO & POWER SYSTEM BATTERIES
(Battery shown is not included in the kit
a
a. Install 8pcs alkaline or rechargeable AA-size batteries (Not Included) into transmitter.
b. Install the power pack and connect to the ESC.
Caution ! Confirm wiring and connections before connecting thespeed control to the battery. Incorrect polarity will
damage your speed control.
a.
b.
b
2
b
7.2V
c
)
R