Customizing The Equalizer Curve -Eq3; Adjusting Setup Items - Set - Sony CDX-GT620U Operating Instructions Manual

•
12
Customizing the equalizer curve
-EQ3
"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press the select
button repeatedly to select "EQ3."
2
Rotate the control dial to select
"CUSTOM."
3
Press the select button repeatedly
until "lOW," "MID" or "HI" appears.
4
Rotate the control dial to adjust the
selected item.
The volume level is adjustable in I dB steps,
from -10 dB to
+ 10
dB.
.....
.
.....
i::::i c:::i
.1:i
Repeat steps 3 and 4 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.
Adjusting setup items - SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the control dial to select the
setting (example "ON" or "OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
"e" indicates the default settings.
ClOCK-ADJ (Clock Adjust) (page 4)
BEEP
To set "BEEP-ON" (e) or "BEEP-OFF."
AUX-A*1
(AUX Audio)
To tum the AUX source display "AUX-A-ON"
(e) or "AUX-A-OFF" (page 13).
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off.
- "A.OFF-NO" (e), "A.OFF-30S (Seconds),"
"A.OFF-30M (Minutes)" or "A.OFF-60M
(Minutes)."
DEMO (Demonstration)
To set "DEMO-ON" (e) or "DEMO-OFF."
DIMMER
To change the brightness of the display.
- "DIMMER-AT" (e): to dim the display
automatically when you turn lights on.
- "DIMMER-OFF": to deactivate the dimmer.
- "DIMMER-ON": to dim the display.
M.DSPl (Motion Display)
To select the Motion Display mode.
- "M.DSPL-SA" (e): to show moving patterns
and spectrum analyzer.
- "M.DSPL-ON": to show moving patterns.
- "M.DSPL-OFF": to deactivate the Motion
Display.
A.SCRl (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/track is changed.
- "A.SCRL-ON" (e): to scroll.
- "A.SCRL-OFF": to not scroll.
lOCAL (Local Seek Mode)
- "LOCAL-ON" : to only tune into stations with
stronger signals.
- "LOCAL-OFF" (e): to tune normal reception.
MONO*2 (Monaural Mode)
To improve poor FM reception, select monaural
reception mode.
- "MONO-ON" : to hear stereo broadcast in
monaural.
- "MONO-OFF" (e): to hear stereo broadcast in
stereo.
lPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "LPF
OFF" (e), "LPF125Hz" or "LPF 78Hz."
lOUD (Loudness)
To allow you to listen clearly at low volume
levels.
- "LOUD-ON" : to reinforce bass and treble.
- "LOUD-OFF" (e): to not reinforce bass and
treble.
BTM (page 9)
*
1 When the unit is turned off.
*2 When FM is received.