Other Functions; Changing The Sound Settings; Bal/Fad/Sub; Customizing The Equalizer Curve -Eq3 - Sony CDX-GT420U Operating Instructions Manual

Other functions
Changing the sound settings
Adjusting the sound
characteristics - BAUFAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
1
Press the select button repeatedly
until "BAl," "FAD" or "SUB" appears.
The item changes as follows:
lOW*l --+ MID*l --+ HI*l --+
SAL (left-right) --+ FAD (front-rear) --+
SUB (subwoofer volume)*2 --+ AUX*3
*
1 When EQ3 is activated (page 11).
*2 When the audio output is set to "SUB"
(page 11).
''ArT'' is displayed at the lowest setting, and can
be adjusted up to 21 steps.
*3 When AUX source is activated (page 12).
2
Rotate the control dial to adjust the
selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Customizing the equalizer curve
-EQ3
"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press
(EQ3)
repeatedly to select "CUSTOM."
2
Press the select button repeatedly
until "lOW," "MID" or "HI" appears.
3
Rotate the control dial to adjust the
selected item.
The volume level is adjustable in 1 dB steps,
from -10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.
Adjusting setup items - SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the control dial to select the
setting (example "ON" or "OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Nots
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
"e" indicates the default settings.
ClOCK-ADJ (Clock Adjust) (page 4)
BEEP
To set "BEEP-ON" (e) or "BEEP-OFF." •
AUX-A*l (AUX Audio)
To tum the AUX source display "AUX-A-ON"
(e) or "AUX-A-OFF" (page 12).
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off.
- "A.OFF-NO" (e), "A.OFF-30S (Seconds),"
"A.OFF-30M (Minutes)" or "A.OFF-60M
(Minutes)."
SUB/REAR*l
To switch the audio output.
- "SUB-OUT" (e): to output to a subwoofer.
- "REAR-OUT": to output to a power amplifier.
DEMO (Demonstration)
To set "DEMO-ON" (e) or "DEMO-OFF."
DIM (Dimmer)
To change the brightness of the display.
- "DIM-ON": to dim the display.
- "DIM-OFF" (e): to deactivate the dimmer.
M.DSPl (Motion Display)
To select the Motion Display mode.
- "M.DSPL-SA" (e): to show moving patterns
and spectrum analyzer.
- "M.DSPL-OFF': to deactivate the Motion
Display.
A.SCRl (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/track is changed.
- "A.SCRL-ON" (e): to scroll.
- "A.SCRL-OFF': to not scroll.
continue to next page--+
11