Section 9: Recording Static Ip Addresses Or Host Names; Table 7: Recording The Ip Addresses Or Host Names - Inova OnTimeTM Owner's Manual

Inova OnTime Digital Clock Owner's Manual

Section 9: Recording Static IP Addresses or Host Names

In order to make the management of your OnTime Digital Clock system as easy as possible,
Inova recommends that you record the IP Address/Host Name for each unit in the system as
it is installed. Refer to Appendix A to see how to determine the IP Address of a clock.
A table is provided below for recording each IP Address/Host Name as the unit is installed.
Record the Clock ID in column 1, the location in column 2, and the IP Address/Host Name in
column 3.
The Host Name will be visible in most DHCP servers. It should describe the location so that
the IP Address of a particular clock will be easy to locate by matching up the Host Name.
CLOCK ID# LOCATION IP ADDRESS/HOST NAME
Table 7: Recording IP Addresses or Host Names
All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be
trademarks of the companies with which they are associated. © 2007 Inova Solutions. | All rights reserved. 6.12.2007 | page 20