Accessing Help Commands; Assigning An Ip Address; Setting The Dhcp Address - Inova OnTimeTM Owner's Manual

Inova OnTime Digital Clock Owner's Manual
The clock's password prompt appears:
iclock password:
5. Enter the clock's password (the default is timely).
The clock's telnet prompt appears:
iclock />
You are now ready to set configuration using the telnet commands.

Accessing Help Commands

For help with a specific telnet command, at the prompt, you have two options:
help or ? along with the command.
For example, to see help for the display option:
display ? or help display

Assigning an IP Address

There are two options for assigning an IP Address to each OnTime Digital Clock:
•
DHCP Address [Factory Default]
•
Static IP Address

Setting the DHCP Address

The factory default is DHCP. When connected to the network, the clock will request DHCP
service. The letters DHCP may be displayed briefly on the screen. If the DHCP message
remains in place, then DHCP service is not available.
All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be
trademarks of the companies with which they are associated. © 2007 Inova Solutions. | All rights reserved. 6.12.2007 | page 15