Configuring Daylight Saving Time; Configuring 12/24 Time Format; Configuring Am/Pm Indicator; Configuring Colons On/Off - Inova OnTimeTM Owner's Manual

Inova OnTime Digital Clock Owner's Manual

Configuring Daylight Saving Time

The following table identifies the process for setting daylight saving time.
No Daylight Saving Time
In the U.S. and Canada
For European Daylight Saving
Time
Other locations
Three additional time related configuration items should also be set initially. The
commands for setting 12/24, AM/PM, and Colons On/Off are identified below.

Configuring 12/24 Time Format

display –t 24
Sets 24 hour display. Note the space before and after –t.
display –t 12
Sets 12 hour display. Note the space before and after –t.

Configuring AM/PM Indicator

display –p off
Turns off pm indicator. Note the space before and after –p.
Display –p on
Turns on pm indicator. Note the space before and after –p.

Configuring Colons On/Off

display –c off
Turns off colons. Note the space before and after –c.
display –c on
Turns on colons. Note the space before and after –c.
All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be
trademarks of the companies with which they are associated. © 2007 Inova Solutions. | All rights reserved. 6.12.2007 | page 18
Type the command to disable DST: dst –none
Press the Enter key.
Type: dst -rule -1 8 2 2 1 1 10 2
Press the Enter key.
Note: dst –raw will work in all clock versions. dst -rule works
with Versions 1.1 or 1.2.
Type: dst -rule 1 -1 2 1 1 -1 9 1
Press the Enter key.
The support web site at
calculator which can compute the correct DST configurations
string for you location. Obtain the correct string and enter it
with the dst –rule command.

Table 5: Configurations for Daylight Saving Time

contains a DST
www.buyinova.com