Table of Contents
Advertisement
Inova OnTime Digital Clock Owner's Manual
5.
Securely attach the mounting unit to the wall using fasteners suitable for the wall surface.
6.
Lift the clock into place and insert the data cable into the jack located on the back of the
clock.
7.
Position the keyhole slots located on the rear of the clock over the mounting tabs on the
clock mount.
8.
Pull the clock slightly downwards until the unit is seated.
9.
Repeat for the second clock if two clocks are being installed back-to-back.
All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be
trademarks of the companies with which they are associated. © 2007 Inova Solutions. | All rights reserved. 6.12.2007 | page 7
- Quick Links:
- Section 5: Digital Clock Configuration
- Table 2: Clock Configuration Methods
- Section 6: Using Dhcp for Addressing...
- Accessing Telnet Command Line and Signing...
- Section 7: Telnet Configuration
- Specifying a Time Server
- Table 6: Troubleshooting Digital Clock
- Appendix A: Digital Clock Configuration
Hide quick links:
Advertisement
Table of Contents
