Inova OnTimeTM Owner's Manual page 15

Inova OnTime Digital Clock Owner's Manual
Here are some things to keep in mind as you set up and use DHCP private option 230:
•
A clock must be re-booted to request a new configuration string from the DHCP
server. The clock does not automatically request a new configuration string at the
expiration of the DHCP lease interval.
•
If private option 230 is not configured on the DHCP server, this does not cause an
error condition on the clock. Rather, the clock will receive an IP address from the
DHCP server in the usual fashion but the clock's settings for Time Server, Time
Zone, DST, etc. will not change.
•
If private option 230 is already in use for another purpose on the DHCP server, it
should not interfere with the operation of the clocks. However, in order to use the
DHCP configuration feature, the clock must be set (via a telnet session) to request
a different private option – e.g., private option 231. See Setting a Different
DHCP Option Number on a Clock on page 12 for additional information.
All claims based on information publicly available at time of printing. All other product or service names mentioned in this document may be
trademarks of the companies with which they are associated. © 2007 Inova Solutions. | All rights reserved. 6.12.2007 | page 10