Product Overview; Controls - Toro 74621 Operator's Manual

1. Choke
2. Fast
3. Continuous variable setting

Product Overview

3
5
4
2
9
1
13
1. Footrest
2. Height of cut lever
3. Motion control levers
4. Smart speed lever
5. Control panel
6. Operator seat
7. Rear drive wheel

Controls

Become familiar with all of the controls in Figure 4 and
Figure 5 before you start the engine and operate the
machine.
6
10
8
11
12
g017860
Figure 4
8. Fuel tank cap
9. Deflector
10. Engine
11. Washout fitting
12. Mower deck
13. Front caster wheel
121-0771
4. Slow
5. Power take-off (PTO), Blade control switch
7
1. Throttle/Choke
2. Ignition switch
Ignition Switch
The ignition switch has three positions, Off, Run and
Start. The key will turn to Start and move back to
Run upon release. Turning the key to the Off position
will stop the engine; however, always remove the key
when leaving the machine to prevent someone from
accidentally starting the engine (Figure 5).
Throttle/Choke Control
The throttle and choke is combined into one control
lever. The throttle controls the engine speed and it has a
continuous variable setting from Slow to Fast. Engage
the choke by moving the lever past the Fast setting until
it stops (Figure 5).
11
Figure 5
Control Panel
3. Blade control switch
(power take-off)