METAL CONNECTOR NAILER 67100 SET UP AND OPERATING INSTRUCTIONS ® Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read and understand tool labels and manual. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
WARNING marking concerning Risk of Explosion. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. SKU 67100 For technical questions, please call 1-800-444-3353. Page 2...
Attach the hose to the tool while tired or under the influ- structure to reduce the risk of loss of ence of drugs, alcohol, or medica- balance if the hose shifts. SKU 67100 For technical questions, please call 1-800-444-3353. Page 3...
Page 4
Such precautionary measures reduce the risk of injury to persons. SKU 67100 For technical questions, please call 1-800-444-3353. Page 4...
Choice of triggering method is im- portant. Check manual for trigger- 15. Fire fasteners into an appropriate ing options. work surface only. Do not attempt to SKU 67100 For technical questions, please call 1-800-444-3353. Page 5...
Page 6
24. Do not engrave or stamp anything peated or long-term exposure to vibra- into the housing to prevent weaken- tion may cause temporary or permanent ing of the housing. physical injury, particularly to the hands, SKU 67100 For technical questions, please call 1-800-444-3353. Page 6...
If abnormal vibration occurs, stop immediately. ASSEMBLY SAVE THESE Read the ENTIRE IMPORTANT SAFETY INFORMATION INSTRUCTIONS. section at the beginning of this manual including all text under Rev 09f SKU 67100 For technical questions, please call 1-800-444-3353. Page 7...
Compressor Quick Release the Trigger. Coupler Regulator with Pressure Gauge Close the in-line safety valve be- Recommended Air Line Components tween the compressor and the tool. SKU 67100 For technical questions, please call 1-800-444-3353. Page 8...
Page 9
The Tool should not fire if subheadings therein before set the Nail is not pressed against the work- up or use of this product. piece. SKU 67100 For technical questions, please call 1-800-444-3353. Page 9...
Page 10
Trigger and squeeze it Slowly slide Pusher past the nails again. The tool must not cycle and toward Nose. (fire). With the Trigger held, carefully lift the tool and press it against the SKU 67100 For technical questions, please call 1-800-444-3353. Page 10...
• Detach the air supply. airflow (CFM) and increase pressure (PSI) output of regulator up to maximum air pressure rating of tool. SKU 67100 For technical questions, please call 1-800-444-3353. Page 11...
If the spring is extended must be regularly drained. Perform- beyond its length, the end will come SKU 67100 For technical questions, please call 1-800-444-3353. Page 12...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replace- ment parts. SKU 67100 For technical questions, please call 1-800-444-3353. Page 13...
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Rev 09f SKU 67100 For technical questions, please call 1-800-444-3353. Page 15...
Page 16
This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 67100 For technical questions, please call 1-800-444-3353. Page 16...