VWDV70 Series Gas Fireplace
1. Partially
disengage C-clamp
Figure 77
KT1113
remove pilot hood
48
2. Pull up on hood
to remove
KT1414
testing engine / Burner assembly
1. Turn on the gas shut off valve.
2. Follow Lighting Instructions on the unit. Light the unit
according to Homeowner's Manual. Use soapy water
to check for leaks on the pilot assembly, regulator,
burner and tubing. Turn off unit.
3. Place the correct Gas Conversion rating label plate
and the regulator's conversion label on the existing
rating plates. Attach conversion label to control valve.
4. Reinstall stones and glass. Refer to Homeowner's
Manual
5. Reinstall glass door.
6. Light unit. Check for proper burner flame appearance.
Refer to Homeowner's Manual.
never check for gas leak with open flame!
FueL conVersIon
20303735