Viewing An Image From A Pc; Connecting A Pc; Displaying An Image From A Pc - Sharp Aquos LC-42BX5H Operation Manual

Using external equipment

Viewing an image from a PC

Connecting a PC

Use the PC terminals to connect a PC.
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 42 for a list of PC signals compatible with the TV.
ANALOG RGB
AUDIO
Ø 3.5 mm stereo minijack cable
(commercially available)
PC
Signal names for 15-pin mini D-sub connector
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5 INPUT5
PC
RGB cable
(commercially available)
Pin No. Signal name
Not connected
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
Pin No.
R
G
B
CSYNC

Displaying an image from a PC

To view an image from a PC, select "PC" using TV/
VIDEO on the remote control unit or TV/VIDEO on the
TV.
When connecting to a PC, the correct input signal type
is automatically detected. (See page 35.)
NOTE
• Each time TV/VIDEO is pressed, the input source toggles.
Signal name Pin No.
GND (Ground)
GND (Ground)
GND (Ground)
+5V
GND (Ground)
Signal name
Not connected
SDA
HD
VD
SCL
41