Viewing An Image From A Pc; Connecting A Pc; Displaying An Image From A Pc - Sharp Aquos LC-46PX5X Operation Manual

Using external equipment

Viewing an image from a PC

Connecting a PC

Use the PC terminals to connect a PC.
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 46 for a list of PC signals compatible with the TV.
ANALOG RGB
AUDIO
PC
Signal names for 15-pin mini D-sub connector
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
TV
PC
PX5X_EN.indb 45 PX5X_EN.indb 45
RGB cable
(commercially available)
Ø 3.5 mm stereo minijack cable
(commercially available)
Pin No. Signal name
Not connected
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No. 5 is not used for inputting the signal.
INPUT1
INPUT2
INPUT3
INPUT4
Pin No. Signal name
R GND (Ground)
G GND (Ground)
B GND (Ground)
CSYNC GND (Ground)

Displaying an image from a PC

To view an image from a PC, select "PC" using TV/
VIDEO on the remote control unit or TV/VIDEO on the
TV.
When connecting to a PC, the correct input signal type
is automatically detected. (See page 36.)
NOTE
• Each time TV/VIDEO is pressed, the input source toggles.
Pin No. Signal name
Not connected
SDA
HD
+5V VD
SCL
45
2007-5-9 11:43:25 2007-5-9 11:43:25