Viewing An Image From A Pc; Connecting A Pc; Displaying An Image From A Pc - Sharp AQUOS LC-37AD1E Operation Manual

Using external equipment

Viewing an image from a PC

Connecting a PC

Use the PC terminals to connect a PC.
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 90 for a list of PC signals compatible with the System.
AVC System (front view)
Signal names for 15-pin mini D-sub connecter
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
INPUT SOURCE
TV
DTV
PC
68
ø 3.5 mm stereo minijack cable
(commercially available)
Pin No.
1
2
3
4
Not connected
5
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
INPUT1
INPUT2
INPUT3
INPUT4
RGB cable
(commercially available)
Signal name Pin No.
6
R
7
G
8
B
9
0
CSYNC

Displaying an image from a PC

To view an image from a PC, select "PC" from the
"INPUT SOURCE" menu using b on the remote
control unit or INPUT on the Display.
When connecting to a PC, the correct input signal type
is automatically detected. (See page 78.) If the PC
image does not come in clearly, you may need to set
the Auto Sync. adjustment in the "Setup" menu. (See
page 72.)
NOTE
• Each time b is pressed, the input source toggles.
PC
Signal name Pin No.
q
GND (Ground)
w
GND (Ground)
e
GND (Ground)
r
+5V
t
GND (Ground)
Signal name
Not connected
SDA
HD
VD
SCL