Warranty - Bowers & Wilkins CT8XO MK2 Installation And Setup Manual

Warranty

Dear customer,
Welcome to B&W.
This product has been designed and manufactured to the highest quality
standards. However, if something does go wrong with this product, B&W
Group Ltd and its national distributors warrant free of charge labour
(exclusion may apply) and replacement parts in any country served by an
official B&W distributor.
Limited Warranty
This limited warranty is valid for a period of five years from the date of
purchase or two years for electronics including amplified loudspeakers.
Terms and Conditions
1 The warranty is limited to the repair of the equipment. Neither
transportation, nor any other costs, nor any risk for removal,
transportation and installation of products is covered by this
warranty.
2 This warranty is only valid for the original owner. It is not
transferable.
3 This warranty will not be applicable in cases other than defects in
materials and/or workmanship at the time of purchase and will not
be applicable:
a) for damages caused by incorrect installation, connection or
packing,
b) for damages caused by any use other than correct use
described in the user manual, negligence, modifications, or use of
parts that are not made or authorised by B&W,
c) for damages caused by faulty or unsuitable ancillary equipment,
d) for damages caused by accidents, lightning, water, fire heat,
war, public disturbances or any other cause beyond the reasonable
control of B&W and its appointed distributors,
e) for products whose serial number has been altered, deleted,
removed or made illegible,
f) if repairs or modifications have been executed by an
unauthorised person.
4 This guarantee complements any national/regional law obligations
of dealers or national distributors and does not affect your
statutory rights as a customer.
2 2
How to claim repairs under warranty
Should service be required, please follow the following procedure:
1 If the equipment is being used in the country of purchase, you
should contact the B&W authorised dealer from whom the
equipment was purchased.
2 If the equipment is being used outside the country of purchase,
you should contact B&W national distributor in the country of
residence who will advise where the equipment can be serviced.
You can call B&W in the UK or visit our web site to get the contact
details of your local distributor.
To validate your warranty, you will need to produce the warranty booklet,
completed and stamped by your dealer on the date of purchase.
Alternatively, you will need the original sales invoice or other proof of
ownership and date of purchase.