Page 2
Made in England Fabriqué en Angleterre Fabriqué en Angleterre CDS6 S3 CDS6 S3 100W/8 100W/8 0000001 0000002 Serial No. Serial No. Figure 7 Figure 8 OUTSIDE OF WALL FRAME MARK AROUND INSIDE OF SLOT SPEAKERS OUT CDS6 S3 Mounting Template TT73015 Amplifier...
Operation speakers before permanently fixing them in manual, negligence, modifications, or place. The CDS6 S3 is specifically designed as an use of parts that are not made or in-wall surround speaker for multi-channel In order to successfully enable both modes authorised by B&W,...
back and vice versa when speakers are Push the wall frame into position and Français used in dipole mode, we recommend that secure. For all situations, this is done by the side speakers have their positive lobes screwing up the swing-out clamps. The Garantie limitée (arrows) pointing towards the front of the initial turn of the screw will cause the...
Page 6
CDS6 Technical Features Nautilus™ tweeter Woven Kevlar® brand fibre cone bass/midrange Description 2-way in-wall selectable dipole/monopole surround system Drive units 1x ø25mm (1 in) alloy dome high-frequency 2x ø80mm (3 in) midrange/high frequency 1x ø130mm (5 in) woven Kevlar® cone bass/midrange...